Grandstream Networks, Inc.
GXV3662_FHD IP Camera Safety Instructions These instructions are intended to assist users with the operation of the GXV3662_FHD and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected. Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected. Warnings Follow these safeguards to prevent serious injury or death.
GXV3662_FHD IP Camera Note： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
GXV3662_FHD IP Camera Contents Welcome .........................................................................................................................................................5 Package Contents............................................................................................................................................6 Product Overview ...........................................................................................................................................
GXV3662_FHD IP Camera Welcome The GXV3662_FHD is a next generation IP camera for remote monitoring and surveillance over your LAN or internet. The GXV3662_FHD combines best in class IP video technology and SIP protocols for a robust IP surveillance solution. The product features H.264 video streams with up to 30 frames per second at 720p resolution, delivering rich image clarity at rapid transmission rates.
GXV3662_FHD IP Camera Package Contents Items in the package: • • • • • • GXV3662_FHD IP Camera 12V DC power Adapter attached to terminal block 8-pin terminal block connector – 8-pin connector block for connecting external devices, such as infrared detector, smoke detector, emergency lights, etc., to Alarm IN and Alarm OUT. You can also connect microphones and powered speakers through the audio in and audio out ports.
GXV3662_FHD IP Camera Product Overview GXV3662_FHD Top View GXV3662_FHD Side View GXV3662_FHD Bottom View Firmware 1.0.1.11 Grandstream Networks, Inc.
GXV3662_FHD IP Camera GXV3662_FHD Inside connections Indicators and Connectors inside the camera 1 2 3 Internal temperature regulator SD card slot Reset It adjusts the temperature to ensure the camera works normal under different weather. SD card slot. Press the Reset button for 6 seconds to perform a factory reset. Firmware 1.0.1.11 Grandstream Networks, Inc.
GXV3662_FHD IP Camera 4 Alarm/Audio NOTE: GXV3662_FHD does not support zoom Type AUDIO Port GND Description Audio Output OUT IN+ Audio Input ININ+ ALARM Alarm Input INO+ Alarm Output O5 Network 6 Power 10/100 Switch LAN port for connecting to Ethernet. The indicator will be steady for connection and flashing for network activity. Type 7 Lens 12V Description 12 V DC input GND Ground For adjusting the lens, unscrew the housing and adjust the lens vertically/horizontally.
GXV3662_FHD IP Camera GXV3662_FHD Sample Connection Diagram GXV3662_FHD Key Features The table below lists the key features the GXV3662_FHD Supports. Features GXV3662_FHD Image Sensor 1/3”, 3 Megapixel CMOS, 2048H x 1536V, day and night mode, exceptionally low noise levels and low light sensitivity. Shutter time: 1/30 to 1/1000 seconds Lens Type 1/3”, 3.3-12mm, F1.6-F3.2 (F1.4-F2.9), DC-Iris, Manual focus: 50cm - ∞, H: 89.8°‐ 23.9°, V: 63.6°‐ 17.
GXV3662_FHD IP Camera Alarm Output Audio Compression Serial Ports IRIS Control Embedded Analytics Pre-/post-alarm Buffer Snapshots Multi-streamingrate for Preview & Recording Security Network Port Network Protocol Power over Ethernet (PoE) Peripheral Ports SIP/VoIP Support Dimensions (D x H) Weight Temperature / Humidity Power Adapter Casing Compliance 125VAC/0.5A, 30VDC/2A, Normal Open G.
GXV3662_FHD IP Camera Minimum Recommended System Requirement • • • • Windows 2000 Server Professional, Windows XP, Windows Vista. CPU: Intel Pentium 4 or higher, 2 GHz. RAM: 1 GB (4 GB recommended for larger systems). Support for DirectX 8.0 and above. . Connect your GXV3662_FHD Using the Power adapter as power supply • • • • Connect an RJ-45 cable to the NETWORK port of the GXV3662_FHD. Connect the other end of the RJ-45 cable to your network or PC.
GXV3662_FHD IP Camera Configuring the GXV3662_FHD via Web Browser The GXV3662_FHD’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. Access the GXV3662_FHD Web Configuration Menu Connect the Camera to a DHCP server. 1. Navigate your browser to: http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_ search.zip 2. Run the Grandstream GS_Search tool, that you just downloaded.
GXV3662_FHD IP Camera Connect to the Camera Using a Static IP. If the camera does not get a response from the DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3662_FHD. 2. Configure the IP address of your PC to: 192.168.1.XXX (1
GXV3662_FHD IP Camera GXV3662_FHD Home Web Page Figure 2: Home web page of GXV3662_FHD Items on GXV3662_FHD Home Page 1 Motion Detection 2 Alarm Event 3 Control Console 4 5 6 ZOOM FOCUS Default 7 8 9 10 11 SPEED BRIGHTNESS CONTRAST SATURATION View Size 12 13 Language Play If the motion detection alarm is triggered, the indicator will flash red. Click on the indicator to turn off the alarm. If an alarm event is triggered, the indicator will flash red.
GXV3662_FHD IP Camera 14 Capture 15 Record 16 17 18 19 Sound Off/On Talk Playback Config Captures the image displayed and saves it to C:\GS_Capture (default directory). Records the video and saves it to C:\GS_Record (default directory). Toggles the sound On or Off. Establishes two-way audio. Replays the saved video. Configures the Save Location for captured images and recorded videos. GXV3662_FHD System Time and Name Page This page allows you to configure the system settings on the GXV3662_FHD.
GXV3662_FHD IP Camera field lets you configure the name of the GXV3662_FHD, which helps GSurf and GS_NVR to indentify the device when using GS_Search to search all the Grandstream network cameras or digital video cameras in the same subnet.
GXV3662_FHD IP Camera Video Settings Preferred Video Codec – The GXV3662_FHD supports the H.264 video codec. Resolution – The higher the resolution is, the better the video quality is, and higher bandwidth is required. Low -----------------------Æ High Resolution QCIF CIF 2CIF 720p Bit Rate – The number of bits that are conveyed or processed per unit of time. Maximum Frame Rate – The video frame rate is adjustable based on network conditions.
GXV3662_FHD IP Camera Microphone Volume: The user can adjust the volume gain of the microphone on a range from 1 to 5 Speaker Volume: The user can adjust the speaker volume on a range from 0 to 31 Power Frequency - this setting should match the power frequency used in the country to avoid flickering in the image. Users can select between 50Hz indoor, 60Hz indoor and outdoor. GXV3662_FHD Networking Page – Assigning an IP to the GXV3662_FHD The GXV3662_FHD supports IP version 4.
GXV3662_FHD IP Camera are set to zero by default. Static IP addresses are recommended for the GXV3662_FHD DNS Configuration There are two methods of DNS configuration on the GXV3662_FHD: 1. The GXV3662_FHD can obtain the DNS server automatically 2. Users can configure their own preferred DNS server HTTP Port The GXV3662_FHD supports user configured http ports. If the HTTP port is changed, the port number is needed to access the web GUI, for instance: http://192.168.1.168:8080.
GXV3662_FHD IP Camera ISP Type. Site Name – The DDNS name for your device. DDNS Account/ DDNS Password – The account and password from the DDNS Provider. STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. 4. Click Save to save the changes. You might need to reboot the device to apply all the changes.
GXV3662_FHD IP Camera 5. Authenticate ID – The SIP service subscriber’s Authenticate ID used for authentication. It can be identical to or different from the SIP User ID. Authenticate Password – The SIP service subscriber’s account password for the GXV to register to the SIP server of the ITSP. STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT. Stream – Choose between Primary and Secondary stream resolutions.
GXV3662_FHD IP Camera GXV3662_FHD Status Page System Statistics System Statistics lists hardware and software information, for example, the part number, the software version, about the GXV3662_FHD. Hardware Version – This field contains the product’s hardware information. Part Number – This field contains the product part number information. Bootloader Version – Bootloader code version number. Core Version – Core code version number. Base Version – Base code version number.
GXV3662_FHD IP Camera Camera Type This section shows the Lens information of GXV3662_FHD. The Lens type information contains the brand name, the size of image sensor, the resolution and so on. GXV3662_FHD User Management Page All current users will be listed in the User List section of this page. You can also add and remove users here. Existing User Name –The field lists all of the current users. You can insert or remove users from the list by click on the Add or Update or Delete button.
GXV3662_FHD IP Camera Firmware Server Path – The IP address or domain name of the firmware server (the location of the firmware files). Automatic Upgrade Interval – Enter the frequency (in minutes) in which the HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration changes. Automatic Upgrade – The default setting is “No.” Choose “Yes” to enable automatic HTTP/HTTPS/TFTP upgrade.
GXV3662_FHD IP Camera configured. User Name/ Password – The user name and password required to log in to your SMTP server, for example, 123@gmail.com/123. SSL – Checked if the SMTP server requires a secure connection. Test Email Account Settings – Click the Test button to send a test email from the From E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get the test email, then the SMTP settings are ready to go.
GXV3662_FHD IP Camera Alarm-in is the alarm input port; users are able to connect sensors such as infrared sensor (PIR), smoke sensor or light sensor to it. The detectable signal voltage range for alarm-in is from 1.8V to 15 V NOTE: Please do not connect a device that has a signal voltage that is higher than 15V, this will damage the IP camera. Internally, the Alarm-out uses relays as a switch (30VAC/2A); users can connect devices such as an alarm siren, alert lights or electric strike to this port.
GXV3662_FHD IP Camera An alarm action is what the GXV3662_FHD is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3662_FHD allows multiple alarm actions. Record Video – If this option is selected, the GXV3601 will record the video when an alarm is triggered. You can enter the length of the video recording (in seconds). You can also choose the storage method for video files: SD card, USB Flash drive, or USB hard drive.
GXV3662_FHD IP Camera Click Add to add a new time schedule. To delete a schedule, check the schedule you would like to remove and click Delete. How to connect an Alarm Output Equipment to GXV3662_FHD Here is a sample connection diagram. Connect the alarm output equipment to the GXV3662_FHD by following the diagram below. GXV3662_FHD Motion Detection Page The GXV3601 supports Motion Detection. To utilize this feature, please follow the steps below: 1. Setup the motion detection monitored area. 2.
GXV3662_FHD IP Camera Show Motion Detection Regions – If this option is selected, the motion detection regions will be displayed on the screen with a white border. The white border for Motion Detection Regions NOTE: If Upload to Alarm center is checked for Alarm Actions, the white border will flash red when a motion detection alarm is triggered. To Edit a Monitored Area 1. In the Select a Region dropdown list, select the region ID. 2. Click Edit. 3. Click on the video, drag and draw you preferred area. 4.
GXV3662_FHD IP Camera Configure Motion Detection Time Schedule This section allows you to configure the time during which the GXV3662_FHD will monitor the motion detection. The GXV3662_FHD not only can monitor your settings but also can take actions when the alarm is triggered. Monitored region Dropdown date list for Available schedules time GXV3662_FHD System Log This page is used to set up the system log server path and system log level.
GXV3662_FHD IP Camera GXV3662_FHD Live Storage This page displays detailed information of the live storage devices connected to the GXV3662_FHD such as video and image files. You can view, download or delete the stored files. Storage Information – This section displays the type, capacity, used space, free space and usage percentage of the connected SD card. JPEG List – This section displays the name, source storage and size of the image files on the connected storage devices.
GXV3662_FHD IP Camera 3. How do you manually uninstall the Grandstream video viewer add-on for IE? Please follow these steps to uninstall the add-on: 1. Delete the GSViewerX Control from C:\WINDOWS\Downloaded Program Files directory 2. Delete GSNetClient.dll, GS_Replay.exe, GSViewerX.ocx, hi_h264dec_w.dll, lik_VoiceEngine_dll.dll and GSViewerX.inf from C:\WINDOWS\system32 4.
GXV3662_FHD IP Camera 9. What is DDNS? Is it important for IP surveillance product to have DDNS support? DDNS is an acronym for Dynamic Domain Name Service. It is important to choose an IP network camera that has DDNS support for dynamic IP addresses. Chances are that the network has a dynamic IP address (which changes with every log on). A DDNS service makes sure that the camera’s IP address always matches up to the current server address.
GXV3662_FHD IP Camera GSurf / mobile phone should be 2088. 16. Some notes on using SD cards 1. The GXV3662_FHD only supports FAT32 formatted SD cards 2. The GXV3662_FHD supports SD and SDHC 3. It takes 10-15 seconds to read SDHC cards with large memory capacities. Please wait 15 seconds to unplug the SD card after you plug them into the device. 4. If there are many files (ie. 1800 or more image batch files) on the SD card, it can take up to 5 minutes to read them.
GXV3662_FHD IP Camera Mobile Intel(R) 4 Series Express Chipset Family Works normally Mobile Intel® 945GM Express Chipset Family Works normally Mobile intel® 915GM/GMS, 910GML Express Chipset Family Works normally Intel® G45/G43 Express Chipset Works normally ATI Technologies, RAGE XL PCI This display adapter cannot display videos. Firmware 1.0.1.11 Grandstream Networks, Inc.
