User's Manual

GXV3651 IP Camera
Firmware 1.0.4.6 Page 29 of 35
Grandstream Networks, Inc. 09/2010
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove.
3. Click Save to save the changes.
Configure Motion Detection & Alarm Actions
An alarm action is what the GXV3651 is going to do when an alarm is triggered during the
defined time period – the time
schedule. The GXV3651 allows
multiple alarm actions.
Configure Motion Detection Time Schedule
This section allows you to configure the time during which the GXV3651 will monitor the
motion detection. The GXV3651 not only can monitor your settings but also can take actions
when the alarm is triggered.
GXV
3651 System Log
This page is used to set up the system log server path and system log level. Once they are
correctly configured, the device will send out system log messages to the system log server,
which will help perform troubleshooting.
Syslog Server – The IP address or URL
of System log server.
Syslog Level – Select the device to
report the log level. Default is None. The
Dropdown list for
date
Available time
schedules
Monitored
region