User's Manual

GXV3651 IP Camera
Firmware 1.0.4.6 Page 28 of 35
Grandstream Networks, Inc. 09/2010
GXV3651 Motion Detection Page
The GXV3651 supports Motion Detection. To utilize this feature, please follow the below
steps:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If
something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions – If
this option is selected, the motion
detection regions will be displayed on
the screen with a white border.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID.
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE: The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
Button to save sensitivity
only
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm
center is checked for Alarm
Actions, the white border will
flash red when a motion
detection alarm is triggered