Grandstream Networks, Inc.
GXV3651 IP Camera Safety Instructions These instructions are intended to assist users with the operation of the GXV3651 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings: Serious injury or death may be caused if any of the warnings below are neglected. Cautions: Injury or damage to the equipment may occur if any of the following caution messages are neglected. Warnings Follow these safeguards to prevent serious injury or death.
GXV3651 IP Camera Contents Welcome .........................................................................................................................................................4 Package Contents............................................................................................................................................5 Product Overview ...........................................................................................................................................
GXV3651 IP Camera Welcome The GXV3651 series is a next generation High Definition IP camera of power and innovation. It’s for remote monitoring and surveillance over your LAN or internet. The innovative AE (Auto Exposure) & AWB (Auto White Balance) algorithms power the advanced ISP (Image Sensor Processor), ensure high-fidelity video qualities and match Digital Still Camera color grade in wide range of light environments. It features cutting edge H.
GXV3651 IP Camera Package Contents Items in the package: • • • • GXV3651 IP Camera 12V DC power Adapter 6-pin terminal block connector – 6-pin connector block for connecting external devices, such as infrared detector, smoke detector and etc., to Alarm IN, Alarm OUT and RS485 pins. Quick installation guide Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3651 IP Camera Product Overview GXV3651 Overview TABLE 1: GXV3651 PRODUCT MODELS Model GXV3651_HD GXV3651_FHD P/N xxx-xx009-xxx xxx-xx0011-xxx Note: The main difference between GXV3651_HD and GXV3651_FHD is the Max frame rate and the Max resolution. GXV3651 Back Panel Indicators and Connectors on Back Panel NETWORK – 10/100 Switch LAN port for connecting to Ethernet. The indicator will be steady for connection and flashing for network activity. AUDIO IN – 3.
GXV3651 IP Camera RESET – Press the Reset button for 6 seconds to perform a factory reset. PINs – 1 PTZ connector, Alarm In connector, and Alarm out connector. USB – USB connector for USB flash/hard drives. POWER – The indicator will be solid green if the power is on. GXV3651 Sample Connection Diagram GXV3651 Key Features The table below lists the key features the GXV3651 Supports. Model GXV3651_HD Video Compression Image Sensor Lens Type Day & Night Responsivity Max Resolution H.264, Motion JPEG 1/2.
GXV3651 IP Camera 30fps @ 1920x1080;1600x1200; 60fps @1280x960;1280x720; Bit rate Video output Audio input Audio output Audio Input Audio Output Alarm Input Alarm Output IRIS Control Embedded Analytics Pre-/post-alarm Buffer Snapshots Multi-streaming-rate for Preview & Recording Security Network Protocol Power over Ethernet (PoE) Peripheral Ports SIP/VoIP Support Dimensions (L x W x H) Weight Temperature / Humidity Power Adapter Compliance 32 Kbps – 10 Mbps BNC, Voltage 1.0Vp_p, Resistance 75Ω 3.
GXV3651 IP Camera Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3651 IP Camera Installation Guide Minimum Recommended System Requirement • • • • Windows 2000 Server Professional, Windows XP, Windows Vista. CPU: Intel Pentium 4 or higher, 2 GHz. RAM: 1 GB (4 GB recommended for larger systems). Support for DirectX 8.0 and above. . Connect your GXV3651 Using the Power adapter as power supply • • • • Connect an RJ-45 cable to the NETWORK port of the GXV3651. Connect the other end of the RJ-45 cable to your network or PC.
GXV3651 IP Camera Configuring the GXV3651 via Web Browser The GXV3651’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. Access GXV3651 Web Configuration Menu Connect the Camera to DHCP server. 1. Navigate your browser to: http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_ search.zip 2. Run the Grandstream GS_Search tool, that you just downloaded. 3.
GXV3651 IP Camera Connect to the Camera using Static IP. If the camera does not get response from DHCP server after 3 minutes, it can be accessed by the default IP 192.168.1.168. 1. Connect your PC to the same network as the GXV3651. 2. Configure the IP address of your PC to: 192.168.1.XXX (1
GXV3651 IP Camera GXV3651 Home Web Page Figure2: Home web page of GXV3651-N and GXV3651-LL Figure3: Home web page of GXV3651 Firmware 1.0.4.6 Grandstream Networks, Inc.
GXV3651 IP Camera Items on GXV3651 Home Page 1 Motion Detection 2 Alarm Event 3 4 5 6 Control Console ZOOM FOCUS Default 7 8 9 10 11 SPEED BRIGHTNESS CONTRAST SATURATION View Size 12 13 Play Capture 14 Record 15 16 17 18 Sound Off/On Talk Playback Config If the motion detection alarm is triggered, the indicator will flash red. Click on the indicator to turn off the alarm. If an alarm event is triggered, the indicator will flash red. Click on the indicator to turn off the alarm.
GXV3651 IP Camera host name. And you can select your time zone from the drop-down list or define your own time zone setting. NOTE: If using a host name for the NTP server, a DNS server must be configured under Basic Settings -> Networking. Synchronize with Local Computer - sets the time from the clock on your computer. Set the Time Manually - this option allows you to manually set the time and date.
GXV3651 IP Camera Resolution – The higher the resolution is, the better the video quality is, and higher bandwidth is required. Low -----------------------Æ High Resolution QCIF CIF 2CIF D1 Bit Rate – The number of bits that are conveyed or processed per unit of time. Maximum Frame Rate – The video frame rate is adjustable based on network conditions. Increasing the frame rate will increase the amount of data significantly therefore consuming more bandwidth.
GXV3651 IP Camera compression is a form of data compression designed to reduce the size of audio files. Usually, the higher the audio compression is, the better the audio quality is. Power Frequency - this setting should match the power frequency used in the country to avoid flickering in the image. And it is only available for GXV3651HD GXV3651 Networking Page – Assign an IP to GXV3651 GXV3651 supports IP version 4.
GXV3651 IP Camera port number is needed to access the web GUI, for instance: http://192.168.1.168:8080. NOTE: If the HTTP Port is 80, when you add this device to GSurf or GS_NVR, the RTSP port is 554. If the HTTP Port is changed, when you add this device to GSurf or GS_NVR, please make sure the RTSP port number equals HTTP Port plus 2000.
GXV3651 IP Camera Register GXV3651 to a SIP Server 1. 2. 3. 4. 5. From the GXV3651 home page, click Basic Settings > SIP. Go to SIP Settings Tab. General Phone Settings. Registered – The field shows the registration status of the account with the SIP server. Unregister On Reboot – If it’s checked, the SIP user’s registration information will be cleared from the server when the phone reboots. Enter the required information. Account Name – The field configures the SIP account name.
GXV3651 IP Camera SIP Open Door Settings Enable SIP open door – This will close the DO connections in the back to close the circuit connected to it. Key to open the door – DTMF key to close the circuit. Digits 0-9 only. Delay lock time (seconds) – This is the time in seconds that the circuit will remain closed when this function is triggered Configure Phone List Page To make sure the GXV3651 can make phone calls to the number you preferred when alarm is triggered. You need to add number to the phone list.
GXV3651 IP Camera number information. Bootloader Version – Bootloader code version number. Core Version – Core code version number. Base Version – Base code version number. Firmware Version – Firmware code version number. System Up Time Since – This field shows the system up time since the last reboot. Network Status MAC Address – The device ID, in HEXADECIMAL format. LAN IP Address – This field shows the LAN IP address of the GXV3651. LAN Subnet Mask – This field shows the LAN subnet mask of the GXV3651.
GXV3651 IP Camera Privilege – The privilege for the user to access to configuration page. Allow Anonymous Login – If ‘Allow Anonymous Login’ is set to Yes, no user name and password are required to login to the GXV3651 web configuration pages. If you login anonymously, you will not be able to change any settings. GXV3651 Maintenance Page Server Maintenance Restart – Click this button to restart the GXV3651.
GXV3651 IP Camera GXV3651 SMTP Page The SMTP server is used to send out emails when an alarm event or motion detection is triggered. The SMTP settings must be configured to make sure the alarm email is sent out properly. SMTP Server Settings Enable SMTP – Checked to enable SMTP SMTP Server – The IP or hostname of the SMTP server, for example, smtp.gmail.com. SMTP Server Port – The port of the SMTP server. The GXV3651 supports port 25 and SSL port 465, which is for SMTP with an encrypted connection.
GXV3651 IP Camera FTP Server – The IP address or hostname of the SMTP server, ie. ftp.myserver.com. FTP Server Port – The port that your FTP server is using. User Name / Password – The user name and password required to log into your FTP server Path – The directory in the FTP server where recorded video will be uploaded. Test FTP Account Settings – Click the Test button to upload a sample file to make sure that FTP is properly configured. GXV3651 PTZ Page This page configures the PTZ settings.
GXV3651 IP Camera 2. Click Advanced Settings > PTZ; in PTZ page, configure the PTZ Protocol and Baudrate according to your connected PTZ device. 3. Click Save and reboot the device to apply all changes. 4. Use those PTZ buttons on the homepage to tilt, pan the GXV3651 and also adjust the speed. NOTE: GXV3651 itself does not support PTZ. The users can connect a PTZ device to the GXV3651 via RS485 pins to pan, tilt and speed. The FOCUS function may not work as many dome cameras support auto focus.
GXV3651 IP Camera Set up Alarm Actions An alarm action is what the GXV3651 is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3651 allows multiple alarm actions. Record Video – If this option is selected, the GXV3651 will record the video when an alarm is triggered. You can enter the length of the video recording (in seconds). You can also choose the storage method for video files: SD card, USB Flash drive, or USB hard drive.
GXV3651 IP Camera Record Video and Upload to FTP server – If this option is selected, the GXV3651will record the video and upload it to the FTP server when an alarm is triggered. You must check Record Video and configure the FTP page properly to use this feature. Email JPEG and Store it to USB drive or SD card – If this option is selected, the GXV3651 will capture the image and store it to connected live storage device when an alarm is triggered.
GXV3651 IP Camera GXV3651 Motion Detection Page The GXV3651 supports Motion Detection. To utilize this feature, please follow the below steps: 1. Setup the motion detection monitored area. 2. Configure the motion detection time schedule. 3. Configure alarm action properly. Setup Motion Detection Monitored Area Enable Motion Detection – If this option is selected, motion detection will be enabled. If something/somebody moves in the motion detection region, an alarm will be triggered.
GXV3651 IP Camera 5. Click Save to save the settings. To Remove a Monitored Area 1. In the Select a Region dropdown list, select the region you would like to remove. 2. Click Remove. 3. Click Save to save the changes. Configure Motion Detection & Alarm Actions An alarm action is what the GXV3651 is going to do when an alarm is triggered during the defined time period – the time schedule. The GXV3651 allows multiple alarm actions.
GXV3651 IP Camera level is one of Debug, Info, Warning or Error. GXV3651 Live Storage This page displays detailed information of the live storage devices connected to the GXV3651 such as video and image files. You can view, download or delete the stored files. Storage Information – This section displays the type, capacity, used space, free space and usage percentage of the connected USB drive or SD card.
GXV3651 IP Camera Once you log into the GXV3501/ 3504 / 3601’s web interface Internet Explorer will indicate that “This website wants to install to following add-on: ‘GSViewer. cab’ from Grandstream Networks, Inc.”. Please install this add-on when prompted by IE. 3. How do you manually uninstall the Grandstream video viewer add-on for IE? Please follow these steps to uninstall the add-on: 1. Delete the GSViewerX Control from C:\WINDOWS\Downloaded Program Files directory 2. Delete GSNetClient.dll, GS_Replay.
GXV3651 IP Camera Please double check whether the device has an audio input connected. The GXV3504 has 4 audio input ports and one MIC IN port. The GXV3501 has a MIC IN port for an audio input. The GXV3651 has a built-in microphone and one MIC IN port for audio inputs. 9. What is DDNS? Is it important for IP surveillance product to have DDNS support? DDNS is an acronym for Dynamic Domain Name Service. It is important to choose an IP network camera that has DDNS support for dynamic IP addresses.
GXV3651 IP Camera changing the HTTP Port of the device? Make sure that the RTSP port of the device is set to 2000 plus the HTTP Port number. For example, if the HTTP port is 88, then the RTSP port of the device that you configured on GSurf / mobile phone should be 2088. 16. Some notes on using SD cards / USB drives. 1. The GXV3501/ 3504/ 3601 only supports FAT32 formatted USB drives 2. The GXV3501/ 3504/ 3601 support SD and SDHC 3.
GXV3651 IP Camera SiS 661 Series Works normally Intel(R) G33/G31 Express Works normally SiS Mirage3 Graphics Works normally SiS 661FX/GX Mirage Graphics Works normally S3 Graphics ProSavageDDR(Microsoft Corporation) Works normally XGI Velari Z7/Z9/Z9S V1.08.12 There is some delay when playing videos.
GXV3651 IP Camera FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
