User's Manual

GXV3615WP_HD IP Camera Series
Firmware 1.0.4.8 Page 9 of 30
Grandstream Networks, Inc. 02/10/12
Installation Guide
Minimum Recommended System Requirement
• Windows 2000 Server Professional, Windows XP, Windows Vista.
• CPU: Intel Pentium 4 or higher, 2 GHz.
• RAM: 1 GB (4 GB recommended for larger systems).
• Support for DirectX 8.0 and above.
.
Connect your GXV3615WP_HD Series
Using the Power adapter as power supply
• Connect an RJ-45 cable to the NETWORK port of the GXV3615WP_HD.
• Connect the other end of the RJ-45 cable to your network or PC.
• Connect the power supply to the DC 12V power jack on the back of the
GXV3615WP_HD.
Using PoE as power supply: (Not applicable on GXV3615W_HD and
GXV3615_HD)
• Connect an RJ-45 to the NETWORK port of GXV3615WP_HD.
NOTE: If you are going to connect the device to a hub/switch/router, please use a
straight-through cable. A cross over cable should be used if you are going to connect the
device directly to a PC.