User's Manual

Grandstream Networks, Inc. GXV3610_HD/FHD v2 User Manual Page 32 of 41
Firmware Version 1.0.2.8 Last Updated: 06/2013
Alarm Action:
 Record Video From…..: Allow user to configure how long pre/post alarm trigger moment,
the video to be captured by the camera.
 Voice Alarm to SIP Phone: When checked and SIP proxy configured and IPCam registered,
SIP alarm call will be made to pre-configured number.
 Upload to Alarm Center: When checked, the alarm video will be transferred to Alarm
Center, like Grandstream free GSurf _Pro VMS software.
 Upload to Alarm HTTP Server: When checked, the alarm will be sent to Alarm HTT Server.
Third Party Server also can be used via GS HTTP API
 Record Video and Upload…: When checked and FTP server configured, the recorded video will
be FTPed to the configured FTP server.
 Email and FTP upload JPEG: When checked, snapshots of trigger moment will be generated
and be emailed to pre-configured email account, also upload to
FTP server if configured.
NOTE:
 Grandstream free GSurf_Pro VMS software can be downloaded here:
http://www.grandstream.com/products/tools/surveillance/gsurf_pro.zip
Motion Detection Time Schedule:
This page allows user to configure Motion Detection Operation Schedule:
Figure 15-2: Motion Detection Schedule Configuration Page
 As shown in Figure 15-2, user can configure the Motion Detection Region with related Start and
Stop time to control the motion detection operation.