User's Manual

Grandstream Networks, Inc. GXV3610_HD/FHD v2 User Manual Page 31 of 41
Firmware Version 1.0.2.8 Last Updated: 06/2013
Motion Detection Configuration Page (Set Alarm)
This page allows user to configure motion detection to trigger alarms:
Figure 15-1: Motion Detection Configuration Page
 Enable Motion Detection: When checked, Motion Detection enabled.
 Show Motion Detection Regions: When checked, Motion Detection region with number will be
displayed in White Rectangle in the screen; when “Edit” clicked,
the Rectangle will become Red, as shown in Figure 16-1.
 Select a Region: Pull down to select and configure alarm region, altogether 16
alarm region available, from 0 to 15.
 Sensitivity: Select configured alarm region number, input number for
sensitivity to trigger alarm, 100 is the maximum sensible value.