User's Manual

GXV3500 Digital Video Encoder/Decoder
Firmware 1.0.1.38 Page 9 of 32
Grandstream Networks, Inc. 08/2011
Compliance
FCC Part15, Subpart B Class B;
EN 55022 Class B,
EN61000-3-2, EN61000-3-3,
EN 55024, EN60950-1; C-tick
AS/NZS CISPR 22, CISPR 24
Installation Guide
Minimum Recommended System Requirement
 Windows 2000 Server Professional, Windows XP, Windows Vista.
 CPU: Intel Pentium 4 or higher, 2 GHz.
 RAM: 1 GB (4 GB recommended for larger systems).
 Support for DirectX 8.0 and above.
.
Connect your GXV3500
Using the Power adapter as power supply
 Connect the video output of an analog camera to the VIN port on the GXV3500 using
a BNC (75Ω) cable.
 Connect an RJ 45 cable to the NETWORK port of the GXV3500
 Connect the other end of the RJ 45 cable to your network or PC directly
 Connect the bare wire marked as 12V from the power supply to the DC 12V plug on
the back of the GXV3500. Connect the negative wire to the GND plug.
 Connect the other end of the power supply to a wall outlet.
Using PoE as power supply:
 Connect the video output of an analog camera to the VIN port on the GXV3500 using
a BNC (75Ω) cable.
 Connect a RJ 45 cable to the NETWORK port of GXV3500
 Connect the other end of the RJ 45 cable to a PoE switch.
NOTE: If you are going to connect the device to a hub/switch/router, please use a
straight-through cable. A cross over cable should be used if you are going to connect the
device directly to a PC.