User's Manual

GXV3500 Digital Video Encoder/Decoder
Firmware 1.0.1.38 Page 24 of 32
Grandstream Networks, Inc. 08/2011
Connect Alarm Input Equipment to the GXV3500
Here are two sample connection diagrams. Connect the alarm equipment to the GXV3500 by
following the diagram below.
Set up Alarm Actions
An alarm action is what the GXV3500 is going to do when an alarm is triggered during the
defined time period – the time schedule. The GXV3500 allows multiple alarm actions.
Record Video – If this option is selected, the GXV3500 will record the video when an alarm is
triggered. You can enter the length of the video recording (in seconds).
Voice Alarm to SIP Phone – If this option is selected, the GXV3500 will make calls to the
number listed in the Phone List page using the configured SIP account when an alarm is
triggered. To use this function, the settings in SIP page must be configured properly.
Alarm Output – If this option is selected, the alarm will output via the configured
method/equipment when it is triggered.
Upload to Alarm Center – This option is an integrated feature with GSurf. If this option is
checked, the GXV3500 will report the alarm event to Gsurf.
Upload to Alarm HTTP server – This option is an integrated feature with the third party VMS.
If this option is checked, the GXV3500 will report the alarm event to the third party VMS.
Record Video and Upload to FTP Server – This option will upload the recorded video in the
device‟s buffer to the FTP server configured.
Email and FTP upload JPEG – If this option is selected, the GXV3500 will capture the image
and upload it to the FTP center when an alarm is triggered. It will also email the image to the
configured email accounts under the SMTP settings.
Set up DI Alarm Time Schedule
This section allows you to configure the time during which the GXV3500 will monitor the
Alarm Input. The GXV3500 not only can monitor your settings but also can take actions when