User's Manual

GXV3500 Digital Video Encoder/Decoder
Firmware 1.0.1.38 Page 22 of 32
Grandstream Networks, Inc. 08/2011
configured.
User Name/ Password – The user name and password required to log in to your SMTP
server, for example, [e-mail]/123.
SSL – Checked if the SMTP server requires a secure connection.
Test Email Account Settings – Click the Test button to send a test email from the From
E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get
the test email, then the SMTP settings are ready to go.
GXV3500 FTP Page
The FTP server is used to store video files if you configure the GXV3500 to record video and
upload it to the FTP server when an alarm event or motion detection is triggered.
FTP Settings
Enable FTP – The default setting is “No,” if you
want the IP camera to upload the recorded video
to the FTP server when an alarm is triggered, set
this field to “Yes.”
FTP Server – The IP address or hostname of the
SMTP server, ie. ftp.myserver.com.
FTP Server Port – The port that your FTP server
is using.
User Name / Password – The user name and
password required to log into your FTP server
Path – The directory in the FTP server where recorded video will be uploaded.
Test FTP Account Settings – Click the Test button to upload a sample file to make sure that
FTP is properly configured.
GXV3500 PTZ Page
This page configures the PTZ settings. Select the PTZ protocol that your connected
equipment supports by clicking on the radio in front of the protocol. Next, select the
Baudrate from the drop down menu.
PTZ Configuration Items
PTZ Protocol – The GXV3500
supports both Pelco-D and Pelco-P.
Select the protocol your PTZ
equipment supports.
PTZ Baudrate – The Baud rate is the
number of distinct symbol changes (signaling events) made to the transmission medium
per second in a digitally modulated signal or a line code.