User's Manual

GXV3275 User Manual
GXV3275 WEB GUI
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
177
Automatic Upgrade
This function is set for the network service provider. The default setting is "No".
If set the checking time for every week/day/intervals, the Auto Upgrade and the
corresponding configurations will be enabled. Input the period time for checking
software upgrade or configuring upgrade in the textbox. The shortest interval is 60
minutes.
If set to “No”, the device only to upgrade when reboot.
Period Time of
Upgrade Checking
Specifies the time period to check for firmware upgrade (in minutes). The default
setting is 10080 minutes (7 days).
Hour of the Day
(0-23)
Defines the hour of the day（0-23） to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Day of the Week
(0-6)
Defines the day of the week（0-6） to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Automatic Upgrade
Rule
Defines the rules for automatic upgrade.
Automatic Reboot
for Upgrade
without confirm
boxes
If set to “Yes”, the device will reboot automativally for upgrade after downloading the
upgrade firmware. Otherwise the prompt for reboot will pop up on LCD before reboot.
The default setting is “Yes”.
Authenticate Conf
File
If set to “Yes”, Authenticates configuration file before acceptance.
Factory Reset
Restore to factory default settings.
Restore mode: Reset all data, Reset VoIP data, Reset user data. Press the Reset
button after selecting the reset mode.
Note: Please back up data before reset in order to avoid data loss.
x-PDFDivision