User's Manual

GXV3275 User Manual
GXV3275 WEB GUI
Grandstream Co., Ltd
Software Version1.0.0.9 Document Version0.2
159
Three options. The default is “log all calls”.
log all calls: Log all calls;
Only log incoming/outgoing calls: Disable Missed calls record.
Disable call log: Disable call record.
The default setting is "Standard". Users may need to select special features to meet
the specific requirements of different soft switch vendors.
Call features can be synchronized with SIP server.
The default settings is "no". The local supports call transfer, call waiting and call
forwarding.
i.e.: * 72 + number means sets unconditional transfer number via call function.
When the local call function conflicts with the server, local call function can be shut
down.
Please refer to chapter
Activate Call Features
for more details.
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds.
Defines the timeout (in seconds) for the rings on no answer. The default setting is 60
seconds.
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#" key will
immediately dial out the input digits. In this case, this key is essentially equivalent to
the "Send" key. If set to "No", the "#" key is included as part of the dialing string.
x-PDFDivision