User's Manual

GXV3275 User Manual
UPGRADING AND PROVISIONING
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
194
Figure 168 Select Firmware File
2. The pop-up dialog will show on screen, users could confirm to update according to the prompt.
MANUAL UPDATE
The steps to update file via HTTP are the same as via TFTP. Theis chapter will take via TFTP as an
example.
1. Go to Maintenance>Upgrade, Select “No” in “ Automatic Upgrade” ,as shown in figure 169.
Figure 169 Set up Auto Update
2. Go to Maintenance>Upgrade, Select “Always Check at Bootup” in “Automatic Upgrade Rule”
option, as shown in figure 170.
Figure 170 Set up Automatic Upgrade Rule
3. Set up upgrade mode and upgrade server. Select “TFTP”in “Upgrade Via”option and input
the local TFTP server address in the “Firmware Server Path” option. URL and IP address are
optional. See figure 171.
Figure 171 Set up Firmware update Mode
x-PDFDivision