User's Manual

Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 66 of 83
(|(cn=%)(sn=%)) returns all records which has the "cn" or "sn" field
starting with the entered prefix;
(!(sn=%)) returns all the records which do not have the "sn" field starting
with the entered prefix;
(&(cn=%) (telephoneNumber=*)) returns all the records with the "cn"
field starting with the entered prefix and "telephoneNumber" field set.
LDAP Number Filter
Configures the filter used for number lookups.
Examples:
(|(telephoneNumber=%)(Mobile=%) returns all records which has the
"telephoneNumber" or "Mobile" field starting with the entered prefix;
(&(telephoneNumber=%) (cn=*)) returns all the records with the
"telephoneNumber" field starting with the entered prefix and "cn" field
set.
LDAP Mail Filter
Configures the filter used for mail lookups.
Example:
(mail=%)
LDAP Displaying Name
Attributes
Configures the entry information to be shown on phone's LCD. Up to
3fields can be displayed.
Example:
%cn %sn %telephoneNumber
Max Hits
Specifies the maximum number of results to be returned by the
LDAPserver. If set to 0, server will return all search results. The default
setting is 50.
Search Timeout (ms)
Specifies the interval (in seconds) for the server to process the
requestand client waits for server to return. The default setting is 4000
seconds.
LDAP Lookup For Dial
Configures to enable LDAP number searching when making
outgoingcalls. The default setting is "No".
LDAP Lookup For Incoming
Call
Configures to enable LDAP number searching when receiving incoming
calls. The default setting is "No".
Note:
For more information on how to configure LDAP on GXV3240D, please refer to the GXV3240D LDAP
Configuration Guide in the following link: