User's Manual

Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 62 of 83
Auto Reboot to Upgrade
Without Prompt
If set to "Yes", the phone will automatically start upgrading after
downloading the firmware files. Otherwise, users would need confirm in
the prompted message in LCD to start upgrading process. The default
value is "Yes".
Authenticate Conf File
Authenticates configuration file before acceptance. The default setting is
"No".
Factory Reset
Click "Reset" to restore to factory default settings. Users can select to
clear the SD card in phone' storage for factory reset.
MAINTENANCE/SYSLOG
Syslog Server
The URL/IP address for the syslog server. The default setting is
"log.ipvideotalk.com".
Syslog Level
Selects the level of logging for syslog. The default setting is
"None".There are 4 levels:DEBUG, INFO, WARNNING AND
ERROR.Syslog messages are sent based on the following events:
 Product model/version on boot up (INFO level);
 NAT related info (INFO level);
 Sent or received SIP message (DEBUG level);
 SIP message summary (INFO level);
 Inbound and outbound calls (INFO level);
 Registration status change (INFO level);
 Negotiated codec (INFO level);
 Ethernet link up (INFO level);
 SLIC chip exception (WARNING and ERROR levels);
 Memory exception (ERROR level).
MAINTENANCE/LOGCAT
Clear Log
Press the clear log button to clear log.
Log Tag
Specifies the log tag to filter the log.
Log Priority
Selects the log priority. The log priority options are: Verbose, Debug,