User's Manual

Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 46 of 83
ACCOUNT/CALL SETTINGS
Start Video Automatically
Defines whether to enable video automatically when there is an
incoming call or a call from the contacts as well as via Click2Dial. If set
to "Yes", the video will be started automatically when answering SIP
video call in the above three cases. If set to "No", answer or dial the
call via SIP audio. The default setting is "Yes".
Start Video Call Fullscreen
Defines whether to enter fullscreen when start video call. The default
setting is "No".
Remote Video Request
Configures the preference to handle video request from the other
party during an audio call. Users could select "prompt", "accept" or
"deny". The default setting is "prompt".
 "prompt": A message will be prompted if a video request is
received. Users can select "Yes" to establish video or "No" to
reject the request.
 "accept": Video request will be accepted automatically and video
will be established.
 "deny": Video request will be rejected automatically.
Dial Plan Prefix
Configures the prefix to be added to each dialed number.
Dial Plan
A dial plan establishes the expected number and pattern of digits for a
telephone number. This parameter configures the allowed dial-plan
for the phone.
Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d,+
2. Grammar: x - any digit from 0-9;
a) xx+ or xx. - at least 2 digit numbers
b) xx - only 2 digit numbers
c) ^ - exclude
d) [3-5] - any digit of 3, 4, or 5
e) [147] - any digit of 1, 4, or 7
f) <2=011> - replace digit 2 with 011 when dialing
g) | - the OR operand
h) \+ - add + to the dialing number
 Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 10 digit numbers with leading digits
1617
 Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for