User's Manual
Table Of Contents
- DOCUMENT PURPOSE
- GNU GPL INFORMATION
- CHANGE LOG
- WELCOME
- PRODUCT OVERVIEW
- GXV3240D LCD SETTINGS
- GXV3240D WEB GUI SETTINGS
- ACCESS GXV3240D WEB GUI
- SAVING CHANGES
- DEFINITIONS
- TOOLBAR
- STATUS PAGE DEFINITIONS
- ACCOUNT PAGE DEFINITIONS
- ADVANCED SETTINGS PAGE DEFINATIONS
- MAINTENANCE PAGE DEFINATION
- MAINTENANCE/NETWORK SETTINGS
- MAINTENANCE/WI-FI SETTINGS
- MAINTENANCE/TIME SETTINGS
- MAINTENANCE/WEB/SSH ACCESS
- MAINTENANCE/UPGRADE
- MAINTENANCE/SYSLOG
- MAINTENANCE/LOGCAT
- MAINTENANCE/DEBUG
- MAINTENANCE/LANGUAGE
- MAINTENANCE/TR-069
- MAINTENANCE/CONTACTS
- MAINTENANCE/LDAP BOOK
- MAINTENANCE/BROADSOFT
- MAINTENANCE/DEVICE MANAGER
- UPGRADING AND PROVISIONING
- FACTORYRESET
- EXPERIENCING THE GXV3240DAPPLICATION PHONE
Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 38 of 83
your VoIP service provider (ITSP).
SIP User ID
User account information, provided by your VoIP service provider
(ITSP). It's usually in the form of digits similar to phone number or
actually a phone number.
SIP Authentication ID
SIP service subscriber's Authenticate ID used for authentication. It can
be identical to or different from the SIP User ID.
SIP Authentication Password
The account password required for the phone to authenticate with the
ITSP (SIP) server before the account can be registered. After it is saved,
this will appear as hidden for security purpose.
Voice Mail UserID
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access
number. For example, in UCM6100 IPPBX, *97 could be used.
Name
The SIP server subscriber's name (optional) that will be used for Caller
ID display.
Tel URI
If the phone has an assigned PSTN telephone number, this field should
be set to "User=Phone". Then a "User=Phone" parameter will be
attached to the Request-Line and "TO" header in the SIP request to
indicate the E.164 number. If set to "Enable", "Tel:" will be used instead
of "SIP:" in the SIP request. The default setting is "Disable".
ACCOUNT/NETWORK SETTINGS
Outbound Proxy
IP address or Domain name of the Primary Outbound Proxy, Media
Gateway, or Session Border Controller. It's used by the phone for
Firewall or NAT penetration in different network environments. If a
symmetric NAT is detected, STUN will not work and ONLY an Outbound
Proxy can provide a solution.
Secondary Outbound Proxy
IP address or Domain name of the Secondary Outbound Proxy, Media
Gateway, or Session Border Controller. Secondary outbound proxy will
be used when the primary outbound proxy fails.
DNS Mode
This parameter controls how the Search Appliance looks up IP
addresses for hostnames. There are three modes: A Record, SRV,
NATPTR/SRV. The default setting is "A Record". If the user wishes to
locate the server by DNS SRV, the user may select "SRV" or
"NATPTR/SRV".
NAT Traversal
This parameter configures whether the NAT traversal mechanism is
activated. Users could selectthe mechanism from NAT NO, STUN,
Keep-alive, UPnP, Auto or VPN. The default setting is "Keep-alive".