User's Manual
Table Of Contents
- DOCUMENT PURPOSE
- GNU GPL INFORMATION
- CHANGE LOG
- WELCOME
- PRODUCT OVERVIEW
- GXV3240D LCD SETTINGS
- GXV3240D WEB GUI SETTINGS
- ACCESS GXV3240D WEB GUI
- SAVING CHANGES
- DEFINITIONS
- TOOLBAR
- STATUS PAGE DEFINITIONS
- ACCOUNT PAGE DEFINITIONS
- ADVANCED SETTINGS PAGE DEFINATIONS
- MAINTENANCE PAGE DEFINATION
- MAINTENANCE/NETWORK SETTINGS
- MAINTENANCE/WI-FI SETTINGS
- MAINTENANCE/TIME SETTINGS
- MAINTENANCE/WEB/SSH ACCESS
- MAINTENANCE/UPGRADE
- MAINTENANCE/SYSLOG
- MAINTENANCE/LOGCAT
- MAINTENANCE/DEBUG
- MAINTENANCE/LANGUAGE
- MAINTENANCE/TR-069
- MAINTENANCE/CONTACTS
- MAINTENANCE/LDAP BOOK
- MAINTENANCE/BROADSOFT
- MAINTENANCE/DEVICE MANAGER
- UPGRADING AND PROVISIONING
- FACTORYRESET
- EXPERIENCING THE GXV3240DAPPLICATION PHONE
Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 33 of 83
Config Server Path:This defines the server path for provisioning.It can be different from the
firmware server for upgrading.
Syslog
Syslog Level
Select the level of logging for syslog. The default setting is "None".There are 4 levels:DEBUG,
INFO, WARNING andERROR.
Syslog Server Address.The URL/IP address for the syslog server. If the GXV3240D has network
connection, the phone will send the syslog output to this server address.
Factory Reset. Open and tap on Factory Reset to restore the GXV3240D to factory default settings.
Developer mode.This mode can be used via ADB tool for advanced debugging purpose.
REBOOT
Tap on "Reboot" to reboot the device.