User's Manual

GXV3240 User Manual
GXV3240 WEB GUI
Grandstream Co., Ltd
Software Version：1.0.0.11 Document Version：0.1
167
Figure 149 GXV3240 Web GUI Maintenance-Network Settings
Table 24 Maintenance/Network Settings Parameters
Parameters
Specifications
Address Type
Allows users to obtain IP address via the following modes
 DHCP: Obtain IP address form DHCP server automatically.
 PPPoE: Dial up via PPPoE.
 Static IP: Static IP address configured by administrator.
DNS Server 1
Enter the DNS Server 1.
DNS Server 2
Enter the DNS Server 2.
Enable LLDP
Layer 3 QoS for
SIP
Defines the Layer 3 QoS parameter for SIP packets. This value is used for IP
Precedence, Diff-Serv or MPLS.
Layer 3 QoS for
Audio
Defines the Layer 3 QoS parameter for Audio packets. This value is used for IP
Precedence, Diff-Serv or MPLS.
Layer 3 QoS for
Video
Defines the Layer 3 QoS parameter for Video packets. This value is used for IP
Precedence, Diff-Serv or MPLS.
Layer 2 QoS
802.1Q/VLAN Tag
Assigns the VLAN Tag of the Layer 2 QoS packets. The default value is 0.
NOTE: If the Layer 2 is uncertain, please don’t modify the Layer 2 tag and priority.
Wrong configuration may cause IP access failure on the phone.
Layer 2 QoS
802.1p Priority
Value
Assigns the priority value of the Layer2 QoS packets. The Default value is 0.
User-Agent
Set up the user agent for Phonebook and Screensaver.
802.1x mode
Allows the user to enable 802.1 x modes on the phone.
Procy
Connect to the proxy server.
x-PDFDivision