User's Manual

GXV3240 User Manual
GXV3240 WEB GUI
Grandstream Co., Ltd
Software Version：1.0.0.11 Document Version：0.1
154
Call Log
Three options. The default is “log all calls”.

log all calls: Log all calls;

Only log incoming/outgoing calls: Disable Missed calls record.

Disable call log: Disable call record.
Special Feature
The default setting is "Standard". Users may need to select special features to meet
the specific requirements of different soft switch vendors.
Feature Key
Synchronization
Call features can be synchronized with SIP server.
Enable Call
Features
The default settings is "no". The local supports call transfer, call waiting and call
forwarding.
i.e.: * 72 + number means sets unconditional transfer number via call function.
When the local call function conflicts with the server, local call function can be shut
down.
Please refer to chapter Activate Call Features for more details.
No Key Entry
Timeout (s)
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds.
Ring Timeout (s)
Defines the timeout (in seconds) for the rings on no answer. The default setting is 60
seconds.
Use # as Dial Key
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#" key will
immediately dial out the input digits. In this case, this key is essentially equivalent to
the "Send" key. If set to "No", the "#" key is included as part of the dialing string.
x-PDFDivision