User's Manual Part 2

Grandstream Networks, Inc. GXV3175 USER MANUAL Page 46 of 68
FIRMWARE VERSION 1.0.0.32 Updated : 11/2010
be set to anonymous to block the caller ID from displaying. The
default setting is NO.
Anonymous Call
Rejection
The default setting is NO；If set to YES，any anonymous call will be
rejected（with 486 Busy message）
Special Feature Different soft switch vendors have special requirements; therefore
users may need to select special features to meet these
requirements. Users can choose from Standard, CBCOM, RNK,
China Mobile, ZTE IMS and Mobotix depending on their need.
The default setting is Standard.
Enable Call Features The default is set to YES. If it is set to NO, call features are disabled.
Call Forward
Unconditional
Sets the number to forward to unconditionally.
Call Forward When Busy Sets the number to forward to when busy.
Call Forward When No
Answer
Sets the number to forward to when no answer.
Delayed Call Forward
Wait Time (s)
The wait time before transferring the call to another extension or to
voicemail; the default setting is 20 seconds.
No Key Entry Timeout (s) Defines the time out duration on no key entry.
Default setting is 4 seconds.
Ring Timeout (s) Defines the time out duration on no answer.
Default setting is 60 second.
Transfer on Conference
Hangup
Defines whether or not the call is transferred to the other party if the
initiator of the conference hangs up.
Default setting is set to No.
Use # as Dial Key Selects whether or not # is used as Send.
Account ring tone This allows the user to configure the general ringtone used for this
account.
Users can choose from different ringtones from the dropdown menu.
They can also upload mp3 files in Ringtone manager for their own
ringtone.
Ring Tone Users can select up to 3 distinctive ringtones to match incoming
caller ID. Users can choose from different ringtones from the
dropdown menu. They can also upload mp3 files in Ringtone
manager for their own ringtone.
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the “Save” button in the Configuration
Menu. The web browser will then display a message window to confirm the saved changes.
Reboot the phone for the new settings to take effect if the settings that you have changed have a
dot next to it.
REBOOTING FROM REMOTE LOCATIONS
Press the “Reboot” button at the top right-hand corner of the configuration menu to reboot the
phone remotely. The web browser will then display a message window to confirm with the user if
they wish to reboot the phone or not. Click on “Yes” and the phone will reboot. Wait
approximately 2 minutes to log in again.