User's Manual Part 2

choose the account from which the message will be sent out. After that, enter the phone number
by tapping on the blank area in “Phone Number” field then press the activated “Add” button. Or
simply press “Find in Contacts” button to add the number from contact list.
Figure 41: Add receiver’s number
After pressing “Find in Contacts” button, users will see the screen as Figure 42 shows. The
primary number for the contact will show in the list by default. If the users need to change to non-
primary number, press
to add other numbers in the contact. Press to add the number
as message receiver. A yellow check will show on the left of the contact after pressing
. Now
tap on “Add” button and the screen will show in Figure 43.
Figure 42: Add receiver’s number from contact list
Grandstream Networks, Inc. GXV3175 USER MANUAL Page 51 of 68
FIRMWARE VERSION 1.0.0.32 Updated : 11/2010