User's Manual Part 1

Grandstream Networks, Inc. GXV3175 USER MANUAL Page 38 of 68
FIRMWARE VERSION 1.0.0.32 Updated : 11/2010
password length is 25 characters.
User Password This defines the user password for web interface access.
Maintenance/Upgrade
Lock Keypad for Update
The default value is NO. If set to YES, the keypad will be disabled
from making any updates.
XML Config File
Password
The password used for encrypting the XML configuration file using
OpenSSL. This is required for the phone to decrypt the encrypted
XML configuration file.
HTTP/HTTPS User Name The user name for the HTTP server.
HTTP/HTTPS Password The password for the HTTP server.
Upgrade Via
This field allows the user to choose the firmware upgrade method:
TFTP, HTTP or HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It can be different
from the Configuration server which is used for provisioning.
Config Server Path
This is the server path for provisioning; it can be different from the
firmware server.
Firmware File Prefix
This field enables your ITSP to lock firmware updates. If configured,
only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone.
Firmware File Postfix
This field enables your ITSP to lock firmware updates. If configured,
only the firmware with the matching encrypted postfix will be
downloaded and flashed into the phone.
Config File Prefix
This field enables your ITSP to lock configuration updates. If
configured, only the configuration file with the matching encrypted
prefix will be downloaded and flashed into the phone.
Config File Postfix
This field enables your ITSP to lock configuration updates. If
configured, only the configuration file with the matching encrypted
postfix will be downloaded and flashed into the phone.
DHCP Option 66 override
Server
The Default setting is YES. If DHCP option 66 is enabled on the LAN
side, the TFTP server can be redirected. Please be very careful
when configuring this as the redirection could break the phone if this
happens during the firmware upgrade.
Automatic Upgrade
The default value is NO. Choose “YES” to enable automatic HTTP
upgrade and provisioning.
Period time of upgrade
checking
Specifies the time period to check for firmware upgrade. The default
setting is 10080 minutes ( 7 days)
Hour of the day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for
firmware upgrades or configuration files changes.
Day of the week (0-6)
Defines the day of the week to check the HTTP/TFTP server for
firmware upgrades or configuration files changes.
Automatic Upgrade Rule
Defines the rules for automatic upgrade: Always Check, when F/W
suffix/prefix changes, Skip the Firmware Check.