User's Manual Part 1

Grandstream Networks, Inc. GXV3175 USER MANUAL Page 36 of 68
FIRMWARE VERSION 1.0.0.32 Updated : 11/2010
Busy Tone
Reorder Tone
Confirmation Tone
Call-Waiting Tone
PSTN disconnect Tone
uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period
of silence. In order to set a continuous ring, OFF should be zero.
Otherwise it will ring ON ms and a pause of OFF ms and then repeat
the pattern. Up to three cadences are supported.
Default Ring Cadence
This defines the ring cadence for the phone. The default setting is:
c=2000/4000;
MAINTENANCE PAGE DEFINITIONS
Maintenance/Network Settings
Address Type
This selects the type of IP address assigned: DHCP, PPPoE or Static
IP.
PPPoE
When PPPoE is selected, the user needs to enter the following:
PPPoE Account ID, PPPoE Password, PPPoE Service Name.
Static IP
When Static IP is selected, the user needs to enter IP address,
Subnet Mask, Default Gateway, DNS Server 1 and DNS Server 2.
Alternate DNS Server This field sets the alternate DNS server for the user.
Layer 3 Qos
This field defines the layer 3 QoS parameter. It is the value used for
IP Precedence, Diff-Serv or MPLS. The Default value is 0.
Layer 2 QoS
802.1Q/VLAN Tag
This field contains the value used for layer 2 VLAN tagging. The
Default value is 0.
Layer 2 QoS
802.1p Priority Value
This assigns the priority value of the Layer2 QoS packets. The
Default value is 0.
802.1x Mode
This field sets 802.1x Mode. The default value is disabled. If EAD-
MD5 is selected, users will be required to enter Identity and MD5
Password.
Proxy
This field sets HTTP Proxy, HTTPS Proxy, FTP Proxy or No Proxy.
Using HTTP Proxy, other protocols can be applied by checking the
box “Apply to Other Protocol”.
Maintenance/Wifi Settings
WiFi Functions
This parameter enables/disables the WiFi function. The default
setting is set to “Disable”.
Wireless Mode
This parameter defines the wireless mode used. The GXV3175
supports 802.11b/g/n
Network Type
This parameter defines the network type of the wireless network: Ad-
hoc or AP/Managed. By default, it is set to “AP or Managed”.
Channel
This parameter defines the channel (1-10) for the wireless network.
The default setting is set to “Auto”.
ESSID
This parameter sets the ESSID for the Wireless network. Press