User's Manual

Grandstream Networks, Inc. GXV3175 USER MANUAL Page 47 of 60
FIRMWARE VERSION 1.0.1.1 Updated : 3/2012
Exposure Setting Select the desired Camera Exposure mode based on the surroundings. The
default setting is set to Auto. The default setting is 8.
Color Mode Select the desired Camera Color Mode (Color or Monochromatic). The
default setting is set to Color.
White Balance Select the desired Camera White Balance to be automatic or Fixed. The
default setting is set to Auto.
Lens Correction
Correct Camera Lens noise. The default setting is set to YES.
It is recommended to set this parameter to YES to reduce camera lens noise
and improve video quality.
Flicker Control
Reduces flicker of image shot with a video camera caused by luminance
fluctuation of an illuminating light source. Users can select 50Hz/60Hz
depending on the frequency of the commercial electrical power.
The default setting is set to Auto.
Maintenance/Device Manager (TV Port)
TV Output Select the desired TV Output type (PAL or NTSC). NTSC 4:3 by default.
SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS
The GXV3175 has three lines that can be configured to accommodate independent SIP accounts. Every
SIP account has an individual configuration page.
Account/General Settings
Account Active Select YES to enable and use the Line.
Account Name The account name for the user that is displayed on the LCD screen.
SIP Server The IP address of the SIP server or the given domain name of the VoIP
service provider.
SIP User ID User account information provided by the VoIP service provider; normally
similar to a telephone number or an actual telephone number.
Authenticate ID The authenticate ID for the SIP user. It can differ or be the same as the SIP
user ID.
Authenticate password The password that the GXV uses to authenticate with the ITSP (SIP) server.
After it is saved, this will appear as blank for security reasons. The
maximum length is 25 characters.
Voice Mail User ID When this is configured, the user can dial to the voicemail server using the
MESSAGE button. This ID is normally the feature code for Voice Mail.