User's Manual

Grandstream Networks, Inc. GXV3175 USER MANUAL Page 41 of 60
FIRMWARE VERSION 1.0.1.1 Updated : 3/2012
Network Type This parameter defines the network type of the wireless network: Ad-hoc or
AP/Managed. By default, it is set to “AP or Managed”.
Channel This parameter defines the channel (1-10) for the wireless network. The
default setting is set to “Auto”.
ESSID This parameter sets the ESSID for the Wireless network. Press “Scan” to
scan for the available wireless network and add it. Users can also press
“Add” to add the ESSID directly.
Security Mode This parameter defines the security mode used for the wireless network.
The following are supported: WEP/Shared, WEP/OPEN, WPA PSK TKIP,
WPA PSK AES, WPA2 PSK TKIP, WPA2 PSK AES. The default setting is
set to “Disabled”.
Users will need to enter the corresponding authentication password for the
security mode.
Maintenance/3G Settings
3G USB Configuration
File
Click Here to download Config file and Script
3G USB Connect Script Click Here to download Config file and Script
Note:
The user is required to have the config file for the modem and a script.
Please make sure that the used 3G Modem is support by the GXV3175(list
of supported 3G modems below)
WCDMA
• Huawei E1750
• Huawei E180
• Sierra Wireless 306
CDMA2000
• ZTE AC581
• Huawei EC1260
EVDO
• Novatel Ovation MC760
Maintenance/Time Settings
NTP Server
This parameter defines the URL or IP address of the NTP (Network Time
Protocol) server. The GXV3175 phone may obtain the date and time from