User's Manual

Grandstream Networks, Inc. GXV3140H USER MANUAL Page 34 of 146
FIRMWARE VERSION 1.0.7.2 Updated : 11/2010
Status/Network Status
MAC Address The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
Address Type This field shows the type of address configured: DHCP, Static IP or PPPoE.
IP Address This field shows the IP address of the GXV-3140.
Subnet Mask This field shows the subnet mask of the GXV-3140.
Gateway This field shows the Gateway of the GXV-3140.
DNS Server This field shows the DNS Server of the GXV-3140.
NAT Type This field shows the type of NAT configured.
Status/System Info
Product Model Defines the product model: GXV3140H.
Hardware Revision Hardware version number: Main Board, Interface Board.
PN Code (Part Number) This field contains the product part number.
Software Version
• Program: This is the main firmware release number, which is always used
for identifying the software (or firmware) system of the phone.
• Boot: Booting code version number.
• DSP: DSP code version number.
• Base: Base code version number.
• Core: Core code version number.
• GUI-A, GUI-B: GUI interface version number.
System Up Time This field shows system up time since the last reboot.
ADVANCED SETTINGS PAGE DEFINITIONS
Advanced Settings/General Settings
Local RTP Port
This parameter defines the local RTP-RTCP port pair used to listen and
transmit. It is the base RTP port for channel 0. When configured, for audio,
channel 0 will use this port _value for RTP and the port_value+1 for its
RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its
RTCP. For video, channel 0 will use port_value+2 for RTP and port_value+3
for its RTCP; channel 1 will use port_value+6 for RTP and port_value+7 for
RTCP. The default value is 5004.