User's Manual

Grandstream Networks, Inc. GXV3140H USER MANUAL Page 27 of 146
FIRMWARE VERSION 1.0.7.2 Updated : 11/2010
Figure 18: Line Selection Screen
2. Call Recover: Press the HOLD button again or press the “Resume” FUNCTION button to return to
the call. Users can also select the line placed on hold to resume the call.
3. Multiple Calls: To place the current call on hold, press the LINE button (
) to select
another line or accept another call. When the line is busy, the user hears a call waiting tone
notifying the user that a call is waiting. Users may toggle between the multiple calls by pressing
the Line button and selecting the line they wish to answer.
CALL TRANSFER
1. Blind Transfer: Press the “CALL TRANSFER” button (
) to place the other party on hold.
The phone will display the following message: “Dial Number (Blind) OR Select Line (Attended)”.
(See Figure 19). Dial the extension number and press F3 for “SEND”. This will transfer the call to
the other party immediately.
2. Attended Transfer: Press the “LINE” button (
) to select an idle line to use for attended
transfer; this will place the other party on hold immediately. Dial the number that you wish to
transfer to and after confirmation from the party, press the “CALL TRANSFER” button. The phone
will display the following message: “Dial Number (Blind) OR Select Line (Attended)”. (See figure
19). Press the “LINE” button and select the line on hold.