User's Manual

Grandstream Networks, Inc. GXV3140H USER MANUAL Page 14 of 146
FIRMWARE VERSION 1.0.7.2 Updated : 11/2010
Figure 5: Connecting the GXV3140H
MAKING THE FIRST CALL WITH IPVIDEOTALK SERVICE
The GXV3140H offers users the ability to send and receive free lifetime video calling to other GXV3140H’s
on the IPVideoTalk network. Once the GXV3140H is connected, video calls are made using Grandstream’s
configuration peer-to-peer SIP technology and IPVideoTalk service. To place the first video calling,
complete these three (3) simple steps:
1) Connect the handset to the phone using the handset cable provided. Connect the NETWORK
cable and the power cable to the GXV3140H using the methods described above. After the phone
boots up and obtains an IP address through DHCP, it will attempt to register to the IPVideoTalk
network. When the user boots the phone for the first time, Account 1 will be registered to the
IPVideoTalk server with a provisioned extension of 810xxxx.
2) If the registration is successful, the IPVideoTalk text on the LCD will turn green and an assigned
IPVideoTalk number (810xxxx) specific to this phone will be displayed. At this point, the phone is
ready for making and receiving video calls over the IPVideoTalk network.
3) Take the phone off hook and dial the number of any other phone registered to the IPVideoTalk
network. If the user has purchased two or more GXV3140H IP Multimedia phones, these phones
are able to establish video calls between each other and the user will immediately experience the
plug and play nature of the GXV3140H. If a user has only one GXV3140H, the user can choose to
experience the multimedia features by dialing 0 to establish a video call with the preset extension
on the server.