User's Manual

Grandstream Networks, Inc. GXV3140 USER MANUAL Page 31 of 83
FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
upgrades or configuration files changes.
Day of the week (0-6) Defines the day of the week to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Automatic Upgrade
Rule
Defines the rules for automatic upgrade: Always Check, when F/W suffix/prefix
changes, Skip the Firmware Check.
Authenticate Conf File Authenticate configuration file before acceptance. The Default setting is NO.
Factory Reset Press the RESET button to factory reset the phone.
Maintenance/Syslog
Syslog Server The URL/IP address for the syslog server.
Syslog Level Select the level of logging for syslog. The default setting is NONE.
There are 4 levels: INFO, DEBUG, ERROR and WARNING.
Maintenance/Debug
Capture Trace Press START to start capturing a trace, and press STOP to abort the capture
process.
View Trace Press LIST to view the list of captured traces. It will show the time the trace was
captured. Click on the name of the file to download and view the trace.
Enable Application
Debug
When set to YES, the trace captured will contain debug messages.
The default setting is NO.
Maintenance/Language
Language Selects the language setting for the phone.
Maintenance/Device Manager (LCD)
Screen Saver Timeout
(m)
This sets the lapsed idle time needed for the screen saver to appear. The default
setting is 5 minutes.
Screen Saver Interval
(s)
The screen saver is a picture slide show. This defines the frequency to change
the picture on the screen for the screen saver.
The default setting is 10 seconds.
LCD Auto Power Off
Time (m)
This defines the lapsed idle time needed for the LCD to power off automatically
in order to save power. The default setting is 15 minutes.
Maintenance/Device Manager (Headset)