User manual

FIRMWARE VERSION 1.0.1.38 GXV3175V2 USER MANUAL Page 69 of 138
"telephoneNumber" field starting with the entered prefix and "cn" field set.
LDAP Mail Filter
Configures the filter used for email lookups.
LDAP Displaying Name
Attributes
The entry information to be shown on phone LCD. Grandstream phones will
display up to 3 fields.
Example:
%cn %sn %telephoneNumber
Max. Hits
The setting specifies the maximum number of results to be returned by the
LDAP server.
If the value is set to 0, server will return all search results. Default is 50.
Search Timeout
The setting specifies how long the server should process the request and
client waits for server to return.
Default is 30 seconds.
LDAP Lookup For Dial
This setting is for enabling LDAP number searching when dialing out.
Default setting is Not Enabled.
LDAP Lookup For
Incoming Call
This setting is for enabling LDAP number searching when receiving calls.
Default setting is Not Enabled.
BLF
The Virtual Busy Lamp Field (BLF) allows users to see the status of other phones (not busy, ringing, busy
etc.). In order to use this feature the SIP server must support BLF or event-list BLF. Figure 42 shows
how the BLF is viewed in the BLF application after configuring extensions. The Virtual BLF can also be
accessed and placed on one of the home screens as shown in Figure 43.