User manual

FIRMWARE VERSION 1.0.1.38 GXV3175V2 USER MANUAL Page 50 of 138
Day of the week (0-6)
Defines the day of the week to check the HTTP/TFTP server for firmware
upgrades or configuration files changes.
Automatic Upgrade Rule
Defines the rules for automatic upgrade: Always Check, when F/W
suffix/prefix changes, Skip the Firmware Check.
Authenticate Conf File
Authenticate configuration file before acceptance. The Default setting is No.
Factory Reset
Restore to factory default settings.
NOTE: Users can use the backup/restore functionality of the phone prior to
the factory reset.
Maintenance/Syslog
Syslog Server
The URL/IP address for the syslog server.
Syslog Level
Select the level of logging for syslog. The default setting is NONE.
There are 4 levels: INFO, DEBUG, ERROR and WARNING.
Syslog messages are sent based on the following events:
Product model/version on boot up (INFO level)
NAT related info (INFO level)
Sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
Inbound and outbound calls (INFO level)
Registration status change (INFO level)
Negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
Memory exception (ERROR level).
Maintenance/Debug
Capture Trace
Press START to start capturing a trace, and press STOP to abort the
capture process.
Trace List
If there are any trace files captured, the dropdown list will show a list of trace
file name.
View Trace
Press “List” to view the list of captured traces. It will show the time the trace
was captured. Click on the name of the file to download and view the trace.
Enable Application Debug
When set to Yes, the trace captured will contain debug messages.