User manual

FIRMWARE VERSION 1.0.1.38 GXV3175V2 USER MANUAL Page 46 of 138
Server
Layer 3 QoS for SIP
This field defines the layer 3 QoS parameter for SIP. It is the value used for
IP Precedence, Diff-Serv or MPLS. The Default value is 46.
Layer 3 QoS for Audio
Layer 3 QoS for audio. The Default value is 46.
Layer 3 QoS for Video
Layer 3 QoS for video. The Default value is 46.
Layer 2 QoS
802.1Q/VLAN Tag
This field contains the value used for layer 2 VLAN tagging. The Default
value is 0.
Layer 2 QoS
802.1p Priority Value
This assigns the priority value of the Layer2 QoS packets. The Default value
is 0.
802.1x Mode
This field sets 802.1x Mode. The default value is disabled. If EAD-MD5 is
selected, users will be required to enter Identity and MD5 Password.
User Agent
Configurable User Agent string for downloading.
Proxy
This field sets HTTP Proxy, HTTPS Proxy, FTP Proxy or No Proxy. Using
HTTP Proxy, other protocols can be applied by checking the box “Apply to
Other Protocol”.
Maintenance/WIFI Settings
WIFI Functions
This parameter enables/disables the WIFI function. The default setting is set
to “Disable”.
Wireless Mode
This parameter defines the wireless mode used. The GXV3175 supports
802.11b/g/n
Network Type
This parameter defines the network type of the wireless network: Ad-hoc or
AP/Managed. By default, it is set to “AP or Managed”.
Channel
This parameter defines the channel (1-10) for the wireless network. The
default setting is set to “Auto”.
ESSID
This parameter sets the ESSID for the Wireless network. Press “Scan” to
scan for the available wireless network and add it. Users can also press
“Add” to add the ESSID directly.
Security Mode
This parameter defines the security mode used for the wireless network.
The following are supported: WEP/Shared, WEP/OPEN, WPA PSK TKIP,
WPA PSK AES, WPA2 PSK TKIP, WPA2 PSK AES. The default setting is
set to “Disabled”.
Users will need to enter the corresponding authentication password for the