User's Manual

GXP2200 USER MANUAL Page 43 of 131
• Repeat the above step to add more parties in. The following figure shows a 3-way conference
established.
Figure 34: 3-way Conference Call Established
2. Remove party from conference
To remove a party from the conference, tap on the
on the right top corner for the corresponding party.
Then it will be disconnected.
3. End conference
To end the conference, tap on
to disconnect all the parties from the conference. GXP2200 will
hang up the call. If the remote party hangs up the call itself, it will be disconnected from the conference but
other parties on GXP2200 will stay in the existed conference.
4. Hold/Resume conference
During the conference, users could press the HOLD button
to hold or resume the conference at
any time.
Note:
For 4-way conference and 5-way conference, PCMA and PCMU are the supported codec in current
firmware version.