User's Manual

GXP2200 USER MANUAL Page 113 of 131
F/W pre/suffix changes, Skip the Firmware Check.
Authenticate Conf File Authenticates configuration file before acceptance. The default setting is
"No".
Factory Reset Restore to factory default settings.

MAINTENANCE/SYSLOG
Syslog Server The URL/IP address for the syslog server.
Syslog Level Selects the level of logging for syslog. The default setting is None. There
are 4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:
• product model/version on boot up (INFO level);
• NAT related info (INFO level);
• sent or received SIP message (DEBUG level);
• SIP message summary (INFO level);
• inbound and outbound calls (INFO level);
• registration status change (INFO level);
• negotiated codec (INFO level);
• ethernet link up (INFO level);
• SLIC chip exception (WARNING and ERROR levels);
• memory exception (ERROR level).

MAINTENANCE/LOGCAT
Clear Log Press the clear log button to clear log.
Log Tag Specifies the log tag to filter the log.
Log Priority Selects the log priority. The log priority options are: Verbose, Debug,
Info, Warn, Error, Fatal, Silent (suppress all output).

MAINTENANCE/DEBUG
Capture Trace Press START to start capturing a trace, and press STOP to stop the
capture process.
View Trace Press LIST to view the list of captured traces. It will show the time when
the trace was captured. Click on the name of the file to download and
view the trace.
