User's Manual

GXP2200 USER MANUAL Page 111 of 131
DHCP Option 42 override NTP
server
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set
up on the LAN. The default setting is "Yes".
DHCP Option 2 to override
Time Zone setting
Allows device to get provisioned for Time Zone from DHCP Option 2 in
the local server automatically. The default setting is "No".
Time Zone Controls the date/time display according to the specified time zone.
Time Display Format 12-hour or 24-hour time display format
Date Display Format Configures the date display format on the LCD. The following formats
are supported:
• Normal (M/DD/YYYY): 1/31/2012
• YYYY/MM/DD: 2012/01/31
• MM/DD/YYYY: 01/31/2012
• DD/MM/YYYY: 31/01/2012
The default setting is DD/MM/YYYY.

MAINTENANCE/WEB/SSHACCESS
Disable SSH If set to “Yes”, the phone will not allow any SSH access to the phone.
The default value is "No".
Access Method Allows users to select HTTP or HTTPS for Web Access.
Port By default, HTTP uses port 80 and HTTPS uses port 443. This field is for
customizing the web port.
Admin Password Allows users to change the admin password. The password field is
purposely hidden after clicking the Save button for security purpose.
This field is case sensitive with a maximum length of 32 characters.
Confirm Admin Password Type the new Admin Password again to confirm.
User Password Allows the administrator to set the password for user-level web GUI
access. This field is case sensitive with a maximum length of 32
characters.
Confirm User Password Type the new User Password again to confirm.

MAINTENANCE/UPGRADE
Lock Keypad for Update If set to "Yes", the configuration changes via keypad will not be allowed.
The default setting is "No".
Caution:
When it's set to "Yes", the phone could get LOCKED if the administrator
password is lost or forgotten.