User's Manual

GXP2200 USER MANUAL Page 110 of 131
DHCP Vendor Class ID (Option
60)
Used by clients and servers to exchange vendor class ID.
IP Address Enter the IP address when static IP is used.
Subnet Mask Enter the Subnet Mask when static IP is used.
Default Gateway Enter the Default Gateway when static IP is used.
DNS Server 1 Enter the DNS Server 1 when static IP is used.
DNS Server 2 Enter the DNS Server 2 when static IP is used.
Enable PPPoE Select "Yes" to enable PPPoE.
PPPoE Account ID Enter the PPPoE account ID.
PPPoE Password Enter the PPPoE Password.
PPPoE Service Name Enter the PPPoE Service Name.
Layer 3 QoS for SIP
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS.
Layer 3 QoS for Audio
Defines the Layer 3 QoS parameter for Audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS.
Layer 3 QoS for Video
Defines the Layer 3 QoS parameter for Video packets. This value is
used for IP Precedence, Diff-Serv or MPLS.
Layer 2 QoS 802.1Q/VLAN
Tag
Assigns the VLAN Tag of the Layer 2 QoS packets. The default value is
0.
Layer 2 QoS 802.1p Priority
Value
Assigns the priority value of the Layer2 QoS packets. The Default value
is 0.
802.1x mode
Allows the user to enable/disable 802.1x mode on the phone. The
default setting is "Disable".
Identity Enter the Identity information for the 802.1x mode.
MD5 Password Enter the MD5 Password for the 802.1x mode.
CA Certificate Enter the CA Certificate for the 802.1x mode.
Client Certificate Enter the Client Certificate for the 802.1x mode.

MAINTENANCE/TIMESETTINGS
Automatic Enables automatic update for the time on the phone. The default setting
is "Yes".
Use Assigned NTP Server
Address
Configures to use the user configured Network Time Protocol (NTP)
Server or not. The default setting is "No".
Assign NTP Server Address Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server.