User's Manual

GXP2200 USER MANUAL Page 109 of 131
SIP server is required to make quick IP call. The default setting is "No".
Disable Conference Disables the Conference function. The default setting is "No".
Disable Transfer Disables the Transfer function. The default setting is "No".
Escape # as %23 in SIP URI Replaces “#” by “%23” for some special situations. The default setting is
"Yes".
Offhook Auto Dial Configures a User ID/extension to dial automatically when the phone is
offhook. The phone will use the first account to dial out. The default
setting is "No".

ADVANCEDSETTING/TONEGENERATOR
Call Progress Tones:
Dial Tone
Ring Back Tone
Busy Tone
Reorder Tone
Confirmation Tone
Call-Waiting Tone
PSTN Disconnect Tone
Using these settings, users can configure ring or tone frequencies based
on parameters from the local telecom provider. By default, they are set
to the North American standard.
Frequencies should be configured with known values to avoid
uncomfortable high pitch sounds.
Syntax: f1=val,f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of
silence. In order to set a continuous ring, OFF should be zero. Otherwise
it will ring ON ms and a pause of OFF ms and then repeat the pattern.
Up to three cadences are supported.
Call-Waiting Tone Gain This adjusts the call waiting tone volume. The default setting is "Low".
Default Ring Cadence This defines the ring cadence for the phone. The default setting is:
c=2000/4000.


MAINTENANCEPAGEDEFINATION
MAINTENANCE/NETWORKSETTINGS
Address Type
Allows users to configure the appropriate network settings on the phone.
Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set to
"DHCP".
DHCP Host name (Option 12)
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.