User's Manual

GXP2200 USER MANUAL Page 107 of 131
be forwarded to when it's not within the configured Time Period.
Busy To Specifies the number to be forwarded to for Call Forward On Busy.
No Answer To Specifies the number to be forwarded to for Call Forward On No Answer.
No Answer Timeout (s)
Defines the timeout (in seconds) before the call is forwarded on no
answer. The default value is 20 seconds.
ADVANCEDSETTINGSPAGEDEFINATIONS
ADVANCEDSETTING/GENERALSETTINGS
Headset Type Selects whether the connected headset is normal RJ11 headset or
Plantronics EHS headset.
Headset Key Mode When headset is connected to the phone, users could use the
HEADSET button in two different modes:
1. Default Mode
• When the phone is in idle, press HEADSET button to offhook
the phone and make calls by using headset. Headset icon will
display on the top of the call screen in dialing/talking status;
• When there is an incoming call, press HEADSET button to pick
the call by using headset;
• When there is an active call using headset, press HEADSET
button to hang up the call;
• When Speaker/Handset is used in dialing/talking status, press
HEADSET button to switch to headset. Press it again to hang up
the call, or press Speaker/Handset to switch back to previous
mode.
2. Toggle Headset/Speaker
• When the phone is in idle, press HEADSET button to switch to
Headset mode. The idle screen will display a Headset icon. In
this mode, if pressing Speaker button or entering digits, headset
will be used by default;
• When there is an incoming call, press Answer icon on the
screen or Speaker button, headset will be used;
• When there is an active call, press HEADSET button to toggle
between Headset and Speaker.
Local RTP Port Defines the local RTP-RTCP port pair used to listen and transmit. It is
the base RTP port for channel 0. When configured, for audio, channel 0