User's Manual

GXP2200 USER MANUAL Page 106 of 131
Special Feature Different soft switch vendors have special requirements. Therefore users
may need select special features to meet these requirements. Users can
choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS, Mobotix,
ZTE NGN, or Huawei IMS depending on the server type. The default
setting is "Standard".
Feature Key Synchronization This feature is used for Broadsoft call feature synchronization. When it's
set to Broadsoft, DND and Call Forward features can be synchronized
with Broadsoft server.
No Key Entry Timeout (s) Defines the timeout (in seconds) for no key entry. If no key is pressed
after the timeout, the digits will be sent out. The default value is 4
seconds.
Ring Timeout (s) Defines the timeout (in seconds) for the rings on no answer. The default
setting is 60 seconds.
Use # as Dial Key Allows users to configure the "#" key as the "Send" key. If set to "Yes",
the "#" key will immediately dial out the input digits. In thise case, this
key is essentially equivalent to the "Send" key. If set to "No", the "#" key
is included as part of the dialing string.
Account Ring Tone Allows users to configure the ringtone for the account. Users can choose
from different ringtones from the dropdown menu.
Call Forward Type Specifies the Call Forward Type:
1. None: Disable Call Forward
2. Unconditional: Forward all calls to particular number
3. Time based: Set a time range. In the time range, calls are forwarded
to the number specified in In Time Forward To; out the time range,
calls are forwarded to the number specified in Out Time Forward
To.
4. Others: when phone is busy, calls are forwarded to the number
specified in Busy To; when incoming calls are not answered, those
calls are forwarded to the number specified in No Answer To; the
waiting time for answering calls is specified in Delayed Call
Forward Wait Time (s).
All To
Specifies the number to be forwarded to when "Unconditional" Call
Forward Type is used.
Time Period
Configures the period of time to forward the call when "Time based" Call
Forward Type is used.
In Time Forward To
When "Time based" Call Forward Type is used, specifies the number to
be forwarded to within the configured Time Period above.
Out Time Forward To When "Time based" Call Forward Type is used, specifies the number to