User's Manual

FIRMWARE VERSION 1.0.0.3 GXP2140 USER MANUAL Page 71 of 77
UNPAIRING A BLUETOOTH DEVICE
1. In the Bluetooth settings, tap and hold on the Bluetooth device ID you want to unpair for 2-4 seconds;
2. In the prompted message, touch Unpair.
Or, once the device is disconnected, users could press and hold on to the Bluetooth device ID, then
options connect, unpair will show
EHS HEADSET
The GXP2140 supports normal RJ11 headset and Plantronics EHS headset. To use Plantronics EHS
headset, go to the GXP2140 web GUI->Maintenance->Device Manager: Headset Type. Select
"Plantronics EHS" and reboot the phone to take effect.
1. Connect EHS Headset (Plantronics) to GXP2140. Insert headset connector into the RJ11 headset port
on the back of GXP2140;
2. To use headset mode, press headset button on the GXP2140. A headset icon will show
on the GXP2140 status bar. There are two different headset mode for users to select from web GUI->
Maintenance->Device Manager: Headset Key Mode. After selecting the desired mode, save the
change and reboot the phone to take effect. Please refer to section GXP2140 Web GUI Settings for
the key mode details.
USB
The GXP2140 supports USB connection for USB storage devices. To use USB mouse or keyboard, simply
plug it into the USB port on the back of the GXP2140 and it will be ready to use.
To connect and access USB storage device:
1. Insert USB storage device into USB port at the back of the GXP2140;
2. It will take a few seconds for the GXP2140 to prepare the connection. Then the USB storage icon will
show on the status bar;
3. To access USB storage, go to GXP2140 MENU->File Manager->usb. Tap on it to access and
manage your data.