User's Manual

FIRMWARE VERSION 1.0.0.3 GXP2140 USER MANUAL Page 44 of 77
MESSAGE
Enable User Presence
Subscription
The phone will subscribe and notify about user presence to SIP server. The
SIP server should support this feature.
Hide Login Soft Key On
Auto User Presence
Subscription
The soft key to login or logout will be hidden on idle screen if auto login ID is
configured below.
Auto User Presence ID
The phone will subscribe user presence automatically with this ID once the
account is registered.
Auto User Presence
password
The phone will subscribe user presence automatically with this password once
the account is registered.
Special Feature
Different soft switch vendors have special requirements. Therefore users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro or Huawei IMS
depending on the server type. The default setting is "Standard".
Account x -> SIP Settings -> Session Timer
Session Expiration
The SIP Session Timer extension that enables SIP sessions to be periodically
"refreshed" via a SIP request (UPDATE, or re-INVITE). If there is no refresh
via an UPDATE or re-INVITE message, the session will be terminated once
the session interval expires. Session Expiration is the time (in seconds) where
the session is considered timed out, provided no successful session refresh
transaction occurs beforehand. The default value is 180 seconds.
Min-SE
The minimum session expiration (in seconds). The default value is 90
seconds.
Caller Request Timer
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it makes outbound calls.
Callee Request Timer
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it receives inbound calls.
Force Timer
If Force Timer is set to "Yes", the phone will use the session timer even if the
remote party does not support this feature. If Force Timer is set to "No", the
phone will enable the session timer only when the remote party supports this
feature. To turn off the session timer, select "No".
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher; or select UAS to
use the Callee or proxy server as the refresher.
UAS Specify Refresher
As a Callee, select UAC to use caller or proxy server as the refresher; or select
UAS to use the phone as the refresher.
Force INVITE
The Session Timer can be refreshed using the INVITE method or the UPDATE
method. Select "Yes" to use the INVITE method to refresh the session timer.