User's Manual

FIRMWARE VERSION 1.0.0.3 GXP2140 USER MANUAL Page 43 of 77
feature is on, the Privacy Header will not show in INVITE. If set to "Yes", the
Privacy Header will always show in INVITE. If set to "No", the Privacy Header
will not show in INVITE.
Use P-Preferred-Identity
Header
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which is when
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will not
show in INVITE. If set to "Yes", the P-Preferred-Identity Header will always
show in INVITE. If set to "No", the P-Preferred-Identity Header will not show in
INVITE.
Account x -> SIP Settings -> Advanced Features
Broadsoft Call Center
When set to "Yes", Feature Key Synchronization will be enabled regardless of
web settings. The default setting is "No".
Hoteling Event
Enables Broadsoft Hoteling event feature. The default setting is "No".
Call Center Status
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
Publish to Call Center
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
Feature Key
Synchronization
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND and Call Forward features can be synchronized with Broadsoft
server. The default setting is "Disabled".
Line Seize Timeout
Defines the interval (in seconds) before the line can be seized when Shared
Line is used. The default value is 15 seconds.
Eventlist BLF URI
Configures the eventlist BLF URI on the phone to monitor the extensions in the
list with Multi Purpose Key. If the server supports this feature, users need to
configure an eventlist BLF URI on the service side first (i.e.,
[e-mail]) with a list of extension included. On the phone, in
this "eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To monitor the extensions in the list, under Web
GUI->Settings->Programmable Keys page, please select "eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
Conference URI
Configures the conference URI when using Broadsoft N-way calling feature.
Music On Hold URI
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
BLF Call-pickup Prefix
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key. The default setting is **.
PUBLISH for Presence
Enables presence feature on the phone. The default setting is "No".
Omit charset=UTF-8 in
Omit charset=UTF-8 in MESSAGE content-type