User's Manual
FIRMWARE VERSION 1.0.0.3 GXP2140 USER MANUAL   Page 40 of 77 
  Core: core version number; 
  Base: base version number; 
  Prog: program version number. This is the main firmware release number, 
which is always used for identifying the software system of the phone; 
  Aux: Aux version number; 
  Dsp: DSP version number. 
System Up Time 
System up time since the last reboot. 
System Time 
Current system time on the phone system. 
Service Status 
GUI and Phone service status. 
Core Dump 
Core dump file that could be downloaded for troubleshooting purpose. 
ACCOUNTS PAGE DEFINITIONS 
Table 13: Account Page Definitions 
Account x -> General Settings 
Account Active 
Activates/deactivates account. The default setting is "Yes". 
Account Name 
The name associated with the SIP account. 
SIP Server 
The URL or IP address, and port of the SIP server. This is provided by your 
VoIP service provider (ITSP). 
Secondary SIP Server 
The URL or IP address, and port of the SIP server. This will be used when the 
primary SIP server fails. 
Outbound Proxy 
IP address or Domain name of the Primary Outbound Proxy, Media Gateway, 
or  Session  Border  Controller.  It's  used  by  the  phone  for  Firewall  or  NAT 
penetration in different network environments. If a symmetric NAT is detected, 
STUN will not work and ONLY an Outbound Proxy can provide a solution. 
SIP User ID 
User account information, provided by your VoIP service provider (ITSP). It's 
usually  in  the  form  of  digits  similar  to  phone  number  or  actually  a  phone 
number. 
Authenticate ID 
SIP  service  subscriber's  Authenticate  ID  used  for  authentication.  It  can  be 
identical to or different from the SIP User ID. 
Authenticate Password 
The account password required for the phone to authenticate with the ITSP 
(SIP) server before the account can be registered. After it is saved, this will 
appear as hidden for security purpose. 
Name 
The  SIP server  subscriber's  name  (optional)  that  will  be  used  for  Caller  ID 
display. 
Voice Mail User ID 
Allows you to access voice messages by pressing the MESSAGE button on 
the phone. This ID is usually the VM portal access number. For example, in 










