User's Manual

FIRMWARE VERSION 1.0.0.3 GXP2140 USER MANUAL Page 33 of 77
CONFIGURATION GUIDE
The GXP2140 can be configured via two ways:
 LCD Configuration Menu using the phone's keypad;
 Web GUI embedded on the phone using PC's web browser.
CONFIGURATION VIA KEYPAD
To configure the LCD menu using phone's keypad, follow the instructions below:
 Enter MENU options. When the phone is in idle, press the round MENU button to enter the
configuration menu;
 Navigate in the menu options. Press the arrow keys up/down/left/right to navigate in the menu
options;
 Enter/Confirm selection. Press the round MENU button or “Select” soft key to enter the selected
option;
 Exit. Press “Exit” soft key to exit to the previous menu;
 The phone automatically exits MENU mode with an incoming call, when the phone is off hook or the
MENU mode if left idle for more than 60 seconds.
 When the phone is in idle, pressing the UP navigation key can see phone’s IP address.
The MENU options are listed in the following table.
Table 11: CONFIGURATION MENU
Status
Displays network status, account registration status, software version number,
MAC address, hardware version number, P/N number.
 Network status.
Press to enter the sub menu for IP setting information (DHCP/Static
IP/PPPoE), IPv4 address, IPv6 address, MAC address, Subnet Mask,
Gateway and DNS server.
Phone
Phone sub menu includes the following options:
 SIP
Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP
Password, SIP Transport and Audio information to register SIP account on the
phone.