User's Manual

FIRMWARE VERSION 1.0.0.3 GXP2140 USER MANUAL Page 22 of 77
Table 9: GXP2140 Keypad Buttons
Contacts. Press to view and edit contact information.
Hold. Press to put call on hold or resume the call.
Mute. Press to mute or unmute the call.
Headset. Press to switch to headset mode.
Message. Press to view voicemail messages.
Transfer. Press to transfer call.
Conference. Press to conference call.
Speaker.
Send/Redial.
Volume.
Up key
Up Navigation key. In idle screen, press to see the IP.
MAKING PHONE CALLS
HANDSET, SPEAKER AND HEADSET MODE
The GXP2140 allows users to switch among handset, speaker or headset when making calls. Press the
Hook Switch to switch to handset; press the Headset button to switch to headset; or press the Speaker
button to switch to speaker.
MULTIPLE SIP ACCOUNTS AND LINES
GXP2140 can support up to 4 independent SIP accounts. Each account is capable of independent SIP
server, user and NAT settings. Each of the line buttons is "virtually" mapped to an individual SIP account.
In off hook state, select an idle line and the dial tone will be heard.
To make a call, select the line you wish to use. The corresponding LINE LED will light up in green. The
user can switch lines before dialing any number by pressing the LINE buttons.