User's Manual
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135
ADMINISTRATION GUIDE
Page 65 of 85
Delete All Contacts
Deletes all contacts from phonebook.
PhonebookGroup Management
Add Group
Specifies Group‟s name to add new group.
Edit Group
Edits selected group.
Phonebook Phonebook Management
Enable Phonebook XML
Download
Configures to enable phonebook XML download. Users could select
HTTP/HTTPS/TFTP to download the phonebook file. The default setting is
"Disabled".
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Phonebook XML Server
Path
Configures the server path to download the phonebook XML. This field could
be IP address or URL, with up to 256 characters.
Phonebook Download
Interval
Configures the phonebook download interval (in minutes). If it's set to 0, the
automatic download will be disabled. The default value is 0. The valid range is
5 to 720 minutes.
Remove Manually-edited
Entries on Download
If set to "Yes", when XML phonebook is downloaded, the entries added
manually will be automatically removed. The default setting is "Yes".
Sort Phonebook by
Sort phonebook based on the selection of first name or last name. The default
setting is “Last Name”.
Download XML
Phonebook
Click on "Download" to download the XML phonebook file to local PC.
Upload XML Phonebook
Click on "Upload" to upload local XML phonebook file to the phone.
Phonebook Key Function
Control the behavior of phonebook key. There are five options: Default, LDAP
Search, Local Phonebook, Local Group, and Broadsoft Phonebook. The
default setting is “Default”, when user presses it, phone LCD will show the five
options.
Default search mode
Configures the default phonebook search mode. The default setting is “Qick
match”.
Phonebook LDAP
LDAP Protocol
Configures the LDAP protocol to LDAP or LDAPS. The default setting is
“LDAP”. LDAPS is a feature to support LDAP over TLS.
Server Address
Configures the IP address or DNS name of the LDAP server.
Port
Configures the LDAP server port. The default port number is “389”.
Base
Configures the LDAP search base. This is the location in the directory where
the search is requested to begin.