User's Manual

GXP2130/GXP2140/GXP2160/GXP2170/GXP2135
ADMINISTRATION GUIDE
Page 62 of 85
Allow DHCP Option 120
to override SIP Server
Enables DHCP Option 120 from local server to override the SIP Server on
the phone. The default setting is "No".
3CX Auto Provision
Enables automatic provision feature on the phone when 3CX is used as the
SIP server. The default setting is "Yes".
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "No".
Hour of the Day (0-23)
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Day of the Week (0-6)
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Disable SIP NOTIFY
Authentication
Device will not challenge NOTIFY with 401 when set to “Yes”. The default
setting is “No”.
Authenticate Conf File
Authenticates configuration file before acceptance. The default setting is
"No".
Download Device
Configuration
Click to download phone‟s configuration file in .txt format.
Upload Device
Configuration
Upload configuration file to phone.
Maintenance Syslog
Syslog Server
The URL or IP address of the syslog server for the phone to send syslog to.
Syslog Level
Selects the level of logging for syslog. The default setting is "None".There
are 4 levels:DEBUG, INFO, WARNING andERROR.
Syslog messages are sent based on the following events:
 Product model/version on boot up (INFO level);
 NAT related info (INFO level);
 sent or received SIP message (DEBUG level);
 SIP message summary (INFO level);
 inbound and outbound calls (INFO level);
 registration status change (INFO level);
 negotiated codec (INFO level);
 Ethernet link up (INFO level);
 SLIC chip exception (WARNING and ERROR levels);
 Memory exception (ERROR level).
Send SIP Log
Configures whether the SIP log will be included in the syslog messages.
The default setting is "No".
Auto Recover From
Abnormal
If set to “Yes”, the phone will automatically recover when running abnormal.
The default setting is “Yes”.