Manualshelf

User's Manual

ManualsBrandsGrandstream Networks ManualsElectronicsIP Phone
51525354555657585960
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135
ADMINISTRATION GUIDE
Page 52 of 85
Intercom
Select Account, and enter the extension number in the Value field to
do the intercom.
LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Description field. It could be the same or different
from the Base in LDAP configuration under Advanced Settings. The
Base in LDAP configuration will be used if the Description field is left
blank. Enter the LDAP Name/Number filter in the Value field.
For example:
If users set MPK 1 as “LDAP Search” for “Account 1”, and set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is
“dc=grandstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
Call Log
Select Account and enter account number in the Value field to
access to the Call Log of that selected account.
Multi-Purpose Key(Only for
GXP2130/GXP2160)
/Extension Boards(Only for
GXP2140/GXP2170)
Assigns a function to the corresponding Multi-Purpose Key. The key
mode options are (For GXP2130 and GXP2160, user could also keep
pressing a MPK 3 seconds on the phone to configure the MPK feature on
LCD):
Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
the Value field to be dialed.
BLF (Busy Lamp Field)
This option has to be supported on the PBX and it indicates the
status of the extension. The three possible states are idle (green),
busy (red), ringing (blinking red).
Presence Watcher
This option has to be supported by a presence server and it is tied to
the "Do Not Disturb" status of the phone's extension.
Eventlist BLF
This option is similar to the BLF option but in this case the PBX
collects the information from the phones and sends it out in one
single notify message.PBX server has to support this feature.
Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is active,