User's Manual
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135
ADMINISTRATION GUIDE
Page 49 of 85
City Code
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Update Interval
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Degree Unit
Specifies the degree unit for the weather information to display on the
phone. User could chose Fahrenheit, Celsius, or Auto to display the
degree unit. The default setting is “Auto”.
Enable Currency Update
Configures to enable or disable currency update on the phone. The
default setting is "Yes". If set to "No", the currency information screen will
not show.
Currency Code
Configures currency code for the phone to look up and display the
currency information. The default setting is:
“EUR/USD;GBP/USD;CAD/USD;AUD/USD;CNY/USD;JPY/USD”
Settings XML Application
Server Path
Configures the server path to download the idle screen XML file. This
field could be IP address or URL, with up to 256 characters.
Softkey Label
Specifies the softkey name displayed on the idle screen for the users to
enter XML application. The default Softkey Label is “XMLApp”.
Settings Programmable Keys (For GXP2130/2140/2160 only)
Line Key X
Assigns a function to the corresponding line key. The key mode options
are:
Line
Regular line key to open up a line and switch line. The Value field
can be left blank.
Shared Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key. The Value field can be left
blank.
Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
the Value field to be dialed, or enter the IP address to set the Direct
IP call as Speed Dial.
Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension
number in the Value field to be monitored.